Select Page

Fitting and Size Guide


Fitting instructions can be found here.

All jewellery is priced and sold as a single piece, unless clearly stated otherwise. For a pair, please select 2 in the quantity field.

Our jewellery is measured by Thickness / Gauge, Internal Diameter and Width / Length.

When picking a jewellery front, such as a Marquise Fan, we will choose the appropriate labret bar type, thickness and disc back. We will need you to provide the length only, but feel free to add a note with any request.
In general, a healed piercing can use a 6mm long bar, while a healing or slightly irritated piercing will need a longer 8mm bar to allow for swelling.
Please contact us for any concerns over sizing, and feel free to add notes.

Where able, we will also provide jewellery front (attachment) dimensions. These will be given in mm, Depth, Width, Height, will be the maximum applicable and will be only for the decorative part.
This is to get an idea of how big or small a jewellery front is (Depth and Width) and how tall it would rise from the body (Height).
Images of the jewellery worn by actual people will also be uploaded on the website in due time.
Remember, our latest work is always available on our Instagram page!

 

Rings are measured by their Internal Diameter and the Wire Thickness.
In case of oval shaped rings, or septum Clickers, they are measured by the pin / bar thickness and the Internal Height.
To see what size would fit you, you can measure the distance from the piercing to the end of your ear/nose in mm, and pick that size.

If you need help, get a ruler, place it next to your piercing trying to measure the distance and send us a photo.

Straight Barbells, such as nipple bars, are measured by the wire thickness and the wearable length in mm.

Curved Barbells, such as belly bars, are measured by the wire thickness and the linear width in mm between ball to ball.


 

Wire thickness is indicated in g or mm (please refer to red markings)

It refers to the diameter size of the stem (thickness of the wire). We indicate this size in gauge and millimeter. For example; 14g (1.6mm)

Size (length) is indicated only in mm (please refer to green markings)

Balls or gems and all other attachments are measured by diameter and indicated only in mm (please refer to blue markings)

 


Thickness Conversion

Gauge (g)Thickness in mm
220.6mm
200.8mm
181.0mm
161.2mm
141.6mm
122mm

Inches Conversion

InchesMillimeter
3/16"4.5mm
7/32"6.0mm
9/32"7.0mm
5/16"8.0mm
11/32"9.0mm
13/32"10.0mm
7/16"11.2mm
15/32"12.0mm
9/16"14.0mm
19/32"15.0mm
5/8"16.0mm
11/16"18.0mm
3/4"19.0mm
22/32"20.0mm

Junipurr Aster Push-In Stud Earring, 14k White Gold

(1 customer review)

139.00

Priced Singly. Click here for a Size Guide

Description

Junipurr Aster Push-In Stud Earring, 14k White Gold is a Piercing Jewellery with a Flat Back Labret Bar.
An earring you can wear all the time, at a Cartilage Piercing, a Lobe Piercing, a Tragus Piercing or a Conch Piercing.
Hand polished to perfection.

Junipurr Jewellery comes with a Lifetime Warranty. This is a ‘Return to Base’ policy and applies to any defects in materials and workmanship.
Mishandled jewellery or Losses are not covered, please check our Jewellery Care section for jewellery handling instructions.

You don’t need to have a green thumb to grow your collection with our Aster Threadless End.  Our Aster Threadless End is a low profile, high polished flower silhouette that comes in 14k solid white gold, rose gold, and yellow gold.  Use this piece as part of a complex and unique curation, or make it the star of the show!  This threadless decorative end is available in 14 karat Yellow Gold, White Gold and Rose Gold options.

All our Piercing Jewellery is priced individually. For a pair, please select two in the quantity box.

Material: 14k White Gold
Stones:
Dimensions: 4.7mm x 4.5mm
Threading: 25g Threadless Pin for 16g/18g
Labret Bar: F-136 Titanium, Anodised in a matching colour. Solid gold Bars are available for purchase, contact us for a quote
Recommended Placement: Cartilage, Helix, Conch, Lobe, Tragus

Contact Us for any custom metal colour or gemstone.

Additional information

Weight 1 g
Dimensions 4.7 × 4.5 × 1.5 mm
Jewellery Threading

Push-In (threadless)

Labret Bar Disc Back

4.0mm

Labret Bar Gauge (Thickness)

16ga (1.2mm)

Labret Bar Length (mm)

5mm, 6mm, 7mm, 8mm, 9mm

Material

14k Gold

Metal Colour

White Gold

Brand

Junipurr

Intended Piercing Placement

Nostril, Tragus, Forward Helix (Small Disc Back), Rest of the Ear (Standard Disc Back)

1 review for Junipurr Aster Push-In Stud Earring, 14k White Gold

  1. Susan H. (verified owner)

    Simple, beautiful and versatile

Add a review

Your email address will not be published. Required fields are marked *