Fitting and Size Guide
Fitting instructions can be found here.
All jewellery is priced and sold as a single piece, unless clearly stated otherwise. For a pair, please select 2 in the quantity field.
Our jewellery is measured by Thickness / Gauge, Internal Diameter and Width / Length.
When picking a jewellery front, such as a Marquise Fan, we will choose the appropriate labret bar type, thickness and disc back. We will need you to provide the length only, but feel free to add a note with any request.
In general, a healed piercing can use a 6mm long bar, while a healing or slightly irritated piercing will need a longer 8mm bar to allow for swelling.
Please contact us for any concerns over sizing, and feel free to add notes.
Where able, we will also provide jewellery front (attachment) dimensions. These will be given in mm, Depth, Width, Height, will be the maximum applicable and will be only for the decorative part.
This is to get an idea of how big or small a jewellery front is (Depth and Width) and how tall it would rise from the body (Height).
Images of the jewellery worn by actual people will also be uploaded on the website in due time.
Remember, our latest work is always available on our Instagram page!
Rings are measured by their Internal Diameter and the Wire Thickness.
In case of oval shaped rings, or septum Clickers, they are measured by the pin / bar thickness and the Internal Height.
To see what size would fit you, you can measure the distance from the piercing to the end of your ear/nose in mm, and pick that size.
If you need help, get a ruler, place it next to your piercing trying to measure the distance and send us a photo.
Straight Barbells, such as nipple bars, are measured by the wire thickness and the wearable length in mm.
Curved Barbells, such as belly bars, are measured by the wire thickness and the linear width in mm between ball to ball.
Wire thickness is indicated in g or mm (please refer to red markings)
It refers to the diameter size of the stem (thickness of the wire). We indicate this size in gauge and millimeter. For example; 14g (1.6mm)
Size (length) is indicated only in mm (please refer to green markings)
Balls or gems and all other attachments are measured by diameter and indicated only in mm (please refer to blue markings)
|Gauge (g)||Thickness in mm|
Junipurr Guardian Moon Push-In Stud Earring, 14k Yellow Gold
€189.00Priced Singly. Click here for a Size Guide
Junipurr Guardian Moon Push-In Stud Earring, 14k Yellow Gold is a Gold Piercing Jewellery with a Flat Back Labret Bar.
An earring you can wear all the time, at a Cartilage Piercing, a Lobe Piercing or a Conch Piercing.
Featuring Swarovski® Zirconia stones set by hand. Hand polished to perfection.
Junipurr Jewellery comes with a Lifetime Warranty. This is a ‘Return to Base’ policy and applies to any defects in materials and workmanship.
Mishandled jewellery or Losses are not covered, please check our Jewellery Care section for jewellery handling instructions.
Guardian Mercury has one elegant marquise cut cubic zirconia set perpendicular to a sleek moon silhouette. This threadless end comes in 14k yellow gold, white gold and rose gold with a Swarovski gem in the middle. Use this piece as part of a complex or unique curation, or make it a star of the show! It measures 6.60 mm x 5.20mm.
Material: 14k Yellow Gold
Stones: Swarovski® Zirconia
Dimensions: 6.60 mm x 5.20mm
Threading: 25g Threadless Pin for 16g/18g
Labret Bar: F-136 Titanium, Anodised in a matching colour. Solid gold Bars are available for purchase, contact us for a quote
Recommended Placement: Cartilage, Helix, Conch, Lobe
Contact Us for any custom metal colour or gemstone.
|Dimensions||6.6 × 5.2 × 2 mm|
|Labret Bar Disc Back||
|Labret Bar Gauge (Thickness)||
|Labret Bar Length (mm)||
5mm, 6mm, 7mm, 8mm, 9mm