Select Page

Fitting and Size Guide


Fitting instructions can be found here.

All jewellery is priced and sold as a single piece, unless clearly stated otherwise. For a pair, please select 2 in the quantity field.

Our jewellery is measured by Thickness / Gauge, Internal Diameter and Width / Length.

When picking a jewellery front, such as a Marquise Fan, we will choose the appropriate labret bar type, thickness and disc back. We will need you to provide the length only, but feel free to add a note with any request.
In general, a healed piercing can use a 6mm long bar, while a healing or slightly irritated piercing will need a longer 8mm bar to allow for swelling.
Please contact us for any concerns over sizing, and feel free to add notes.

Where able, we will also provide jewellery front (attachment) dimensions. These will be given in mm, Depth, Width, Height, will be the maximum applicable and will be only for the decorative part.
This is to get an idea of how big or small a jewellery front is (Depth and Width) and how tall it would rise from the body (Height).
Images of the jewellery worn by actual people will also be uploaded on the website in due time.
Remember, our latest work is always available on our Instagram page!

 

Rings are measured by their Internal Diameter and the Wire Thickness.
In case of oval shaped rings, or septum Clickers, they are measured by the pin / bar thickness and the Internal Height.
To see what size would fit you, you can measure the distance from the piercing to the end of your ear/nose in mm, and pick that size.

If you need help, get a ruler, place it next to your piercing trying to measure the distance and send us a photo.

Straight Barbells, such as nipple bars, are measured by the wire thickness and the wearable length in mm.

Curved Barbells, such as belly bars, are measured by the wire thickness and the linear width in mm between ball to ball.


 

Wire thickness is indicated in g or mm (please refer to red markings)

It refers to the diameter size of the stem (thickness of the wire). We indicate this size in gauge and millimeter. For example; 14g (1.6mm)

Size (length) is indicated only in mm (please refer to green markings)

Balls or gems and all other attachments are measured by diameter and indicated only in mm (please refer to blue markings)

 


Thickness Conversion

Gauge (g)Thickness in mm
220.6mm
200.8mm
181.0mm
161.2mm
141.6mm
122mm

Inches Conversion

InchesMillimeter
3/16"4.5mm
7/32"6.0mm
9/32"7.0mm
5/16"8.0mm
11/32"9.0mm
13/32"10.0mm
7/16"11.2mm
15/32"12.0mm
9/16"14.0mm
19/32"15.0mm
5/8"16.0mm
11/16"18.0mm
3/4"19.0mm
22/32"20.0mm

Implant Grade Titanium Straight Barbell

(1 customer review)

19.00

Priced Singly. Click here for a Size Guide

Description

Implant Grade Titanium Straight Barbel, Internally Threaded and highly polished to a mirror finish.
Longer sizes, suitable for an Industrial Piercing
In general Industrial will need 14g 30mm to 40mm. You can measure in mm with a ruler, from the edge of one piercing to the edge of the other for the minimum size you can get.

All our Piercing Jewellery is priced individually. For a pair, please select two in the quantity box.

Material: Implant Grade Titanium F-136
Threading: 1.2mm
Dimensions: From 20mm to 40mm, contact us for the extreme sizes
Ball Sizes: 3.0mm, 4.0mm, 5.0mm
Gauge (Thickness): 14g (1.6mm), 16g (1.2mm)

Additional information

Weight 1 g
Jewellery Threading

0.9mm thread, 1.2mm thread

Labret Bar Gauge (Thickness)

14ga (1.6mm), 16ga (1.2mm)

Barbell Length

Large, over 20mm

Material

Implant Grade Titanium F-136

Metal Colour

Titanium / Steel

Brand

Piercer Charlie's Creations

1 review for Implant Grade Titanium Straight Barbell

  1. Roz (verified owner)

    Exactly what I was looking for. Fantastic quality jewelry.

Add a review

Your email address will not be published. Required fields are marked *

Product added successful