Fitting and Size Guide


Fitting instructions can be found here.

Our jewellery is measured by Thickness / Gauge, Internal Diameter and Width / Length.

When picking a jewellery front, such as a Marquise Fan, we will choose the appropriate labret bar type, thickness and disc back. We will need you to provide the length only.
In general, a healed piercing can use a 6mm long bar, while a healing or slightly irritated piercing will need a longer 8mm bar to allow for swelling.
Please contact us for any concerns over sizing, and feel free to add notes.

Where able, we will also provide jewellery front (attachment) dimensions. These will be given in mm, Depth, Width, Height, will be the maximum applicable and will be only for the decorative part.
This is to get an idea of how big or small a jewellery front is (Depth and Width) and how tall it would rise from the body (Height).
Images of the jewellery worn by actual people will also be uploaded on the website in due time.
Remember, our latest work is always available on our Instagram page!

 

Rings are measured by their Internal Diameter and the Wire Thickness.
In case of oval shaped rings, or septum Clickers, they are measured by the pin / bar thickness and the Internal Height.
To see what size would fit you, you can measure the distance from the piercing to the end of your ear/nose in mm, and pick that size.

If you need help, get a ruler, place it next to your piercing trying to measure the distance and send us a photo.

Straight Barbells, such as nipple bars, are measured by the wire thickness and the wearable length in mm.

Curved Barbells, such as belly bars, are measured by the wire thickness and the linear width in mm between ball to ball.

Wire thickness is indicated in g or mm (please refer to red markings)

It refers to the diameter size of the stem (thickness of the wire). We indicate this size in gauge and millimeter. For example; 14g (1.6mm)

Size (length) is indicated only in mm (please refer to green markings)

Balls or gems and all other attachments are measured by diameter and indicated only in mm (please refer to blue markings)

 


Thickness Conversion

Gauge (g)Thickness in mm
220.6mm
200.8mm
181.0mm
161.2mm
141.6mm
122mm

Inches Conversion

InchesMillimeter
3/16"4.5mm
7/32"6.0mm
9/32"7.0mm
5/16"8.0mm
11/32"9.0mm
13/32"10.0mm
7/16"11.2mm
15/32"12.0mm
9/16"14.0mm
19/32"15.0mm
5/8"16.0mm
11/16"18.0mm
3/4"19.0mm
22/32"20.0mm

Plain Ring Clicker Earring, Titanium

14.0019.00

Size Guide
Clear
Add to Wishlist
Share

Plain Ring Clicker Earring, Titanium is a Piercing Jewellery you can wear all the time, as a Nose Ring or at a Cartilage Piercing, a Helix Piercing, a Septum Piercing, a Nose Piercing, a Daith Piercing, a Lobe Piercing etc

Some examples follow, but sizing depends on the individual.
20g – 18g, 7mm fits a Nostril
18g-16g, 8mm fits a Septum, Daith, Lobes, Helix etc
14g would be used for Septum, Lobes, Daith that are pierced to that gauge
16g 11mm-12mm fits a Conch

If you are unsure, you can measure in mm with a ruler, from your piercing to the edge of your Ear / Nose for the minimum size you can get.
We are happy to help if you send us a photo!

Material: Implant Grade Titanium F-136
Internal diameter: 5mm, 6mm, 7mm, 8mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm
Gauge (Thickness): 14g (1.6mm), 16g (1.2mm), 16g (1.0mm), 20g (0.8mm)

14g or thicker, available on request.
Contact Us for any custom metal colour

Ring Gauge (Thickness)

16g (1.2mm), 18g (1.0mm), 20g (0.8mm)

Ring Internal Diameter

5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm

Metal Colour

Titanium / Steel

Material

Implant Grade Titanium F-136