Fitting and Size Guide
Fitting instructions can be found here.
All jewellery is priced and sold as a single piece, unless clearly stated otherwise. For a pair, please select 2 in the quantity field.
Our jewellery is measured by Thickness / Gauge, Internal Diameter and Width / Length.
When picking a jewellery front, such as a Marquise Fan, we will choose the appropriate labret bar type, thickness and disc back. We will need you to provide the length only, but feel free to add a note with any request.
In general, a healed piercing can use a 6mm long bar, while a healing or slightly irritated piercing will need a longer 8mm bar to allow for swelling.
Please contact us for any concerns over sizing, and feel free to add notes.
Where able, we will also provide jewellery front (attachment) dimensions. These will be given in mm, Depth, Width, Height, will be the maximum applicable and will be only for the decorative part.
This is to get an idea of how big or small a jewellery front is (Depth and Width) and how tall it would rise from the body (Height).
Images of the jewellery worn by actual people will also be uploaded on the website in due time.
Remember, our latest work is always available on our Instagram page!
Rings are measured by their Internal Diameter and the Wire Thickness.
In case of oval shaped rings, or septum Clickers, they are measured by the pin / bar thickness and the Internal Height.
To see what size would fit you, you can measure the distance from the piercing to the end of your ear/nose in mm, and pick that size.
If you need help, get a ruler, place it next to your piercing trying to measure the distance and send us a photo.
Straight Barbells, such as nipple bars, are measured by the wire thickness and the wearable length in mm.
Curved Barbells, such as belly bars, are measured by the wire thickness and the linear width in mm between ball to ball.
Wire thickness is indicated in g or mm (please refer to red markings)
It refers to the diameter size of the stem (thickness of the wire). We indicate this size in gauge and millimeter. For example; 14g (1.6mm)
Size (length) is indicated only in mm (please refer to green markings)
Balls or gems and all other attachments are measured by diameter and indicated only in mm (please refer to blue markings)
|Gauge (g)||Thickness in mm|
Anatometal Vice Push-In Stud Earring, 18k Yellow Gold
€179.00 – €189.00Priced Singly. Click here for a Size Guide
Anatometal Vice Push-In Stud Earring, 18k Yellow Gold is a Piercing Jewellery with a Flat Back Labret Bar.
An earring you can wear all the time, at a Cartilage Piercing, a Lobe Piercing, a Helix Piercing, a Medusa Piercing, a Lip Piercing or a Conch Piercing.
Featuring Swarovski® Zirconia stones set by hand. Hand polished to perfection.
Usually, Clear Swarovski® Zirconia stones are in stock.
Get in touch for other stone options please.
Jewellery by Anatometal comes with a Lifetime Warranty. This is a ‘Return to Base’ policy and applies to any defects in materials and workmanship.
Mishandled jewellery or Losses are not covered, please check our Jewellery Care section for jewellery handling instructions.
Material: Yellow Gold
Stones: Swarovski® Zirconia or any Faceted or Cabochon Gemstone
Dimensions: 2mm gem, with overall 5mm Diameter
Threading: 25g Threadless Pin for 16g/18g
Labret Bar: F-136 Titanium, Anodised in a matching colour. Solid Gold Bars are available for purchase, contact us for a quote
Recommended Placement: Cartilage, Helix, Conch, Lobe
Contact Us for any custom metal colour, gemstone or threading. Threading may vary, we will confirm with you upon ordering.
|Dimensions||5 × 5 × 1.7 mm|
|Labret Bar Length (mm)||
5mm, 6mm, 7mm, 8mm, 9mm
|Labret Bar Gauge (Thickness)||
14ga (1.6mm), 16ga (1.2mm)
|Labret Bar Disc Back||